Arkansas
1418 Airlane Dr.
Benton, AR 72015
(501) 776-8454

Pennsylvania
638 Pennsylvania 92
Tunkhannock, PA 18657
(888) 267-6843

Intro to Nondestructive Testing (NDT) - 5 Day

Get Pricing

On-site and custom training available.

Course Overview

5 Days / 40 Hours

$2,000.00

The best starting place to learn nondestructive testing (NDT) methods is a good basic general-knowledge class that includes an overview of inspection and testing that addresses many aspects of the process, from terminology to techniques. 

Personnel being considered for initial certification should complete sufficient organized training, which may include instructor-led training, self-study, virtual instructor-led training, computer-based training or web-based training.  Computer-based training and web-based training should track hours and content of training with student examinations in accordance with recommended Practice SNT-TC-1A, 7.2.  The sufficiently organized training shall be such as to ensure the student is thoroughly familiar with the principles and practices of the specified NDT method related to the level of certification desired and applicable to the processes to be used and the products to be tested.  All training programs should be approved by the responsible NDT Level III.

The training program should included sufficient examinations to ensure understanding of the necessary information.

Recommended training course outlines and references for NDT Levels I, II, and III personnel, which may be used as technical source material, are contained in ANSI/ASNT CP-105 – Topical Outlines for Qualification of Nondestructive Testing Personnel.

The employer who purchases outside training services is responsible for assuring that such services meet the requirements of the employer’s written practice.

Quality Guarantee

AIS classes can satisfy the recommendations of the American Society for Nondestructive Testing (ASNT) Recommended Practice No. SNT-TC-1A Personnel Qualification and Certification in Nondestructive Testing.

Payment Terms

Fees are payable one week prior to the first day of the course. Fees include textbooks, handout materials, course tests, and training records and certificates. Payment may be made by cash, check payable to "Applied Inspection Systems" or by credit card (MasterCard, Visa, Discover and American Express cards accepted).

Cancellation and Refund Policy

If you cancel your enrollment, we must be notified at least five (5) working days prior to the first day of the course. Otherwise, only 50% of the course fee will be refunded.

If we cancel a course, you will be issued a 100% refund.

Other Courses

Intro to Nondestructive Testing (NDT)

This course is a basic general-knowledge class that includes an overview of inspection and testing, addressing many aspects of the process, from terminology to techniques.

$800.00

2 Days / 16 Hours

More info ›

Magnetic Particle Testing (MT) Level I

Covering theory related to magnets and magnetic fields, this course prepares for magnetic particle testing methods.

$650.00

12 Hours

More info ›

Magnetic Particle Testing (MT) Level II

Building upon the Level I course, this Level II course explains advanced theories including flux fields and discontinuities and discusses additional evaluation methods and quality control.

$400.00

8 Hours

More info ›

Liquid Penetrant Testing (PT) Level I

Covers theory related to liquid penetrant processing and testing.

$250.00

4 Hours

More info ›

Liquid Penetrant Testing (PT) Level II

Builds upon the Level I course and includes techniques for appropriate test selection and evaluation methods.

$400.00

8 Hours

More info ›

Radiographic Testing (RT) Level I

Covers basic principles of radiation, safety and radiographic testing technique.

$2,050.00

40 Hours

More info ›

Radiographic Testing (RT) Level II

Expands on Level I course and discusses advanced radiographic techniques, safety principles, standards, codes and procedures.

$2,000.00

40 Hours

More info ›

Film Interpretation (with RT Level I)

Covers overview of darkroom facilities, film processing and film interpretation methods.

$1,300.00

24 Hours

More info ›

Ultrasonic Testing (UT) Level I

Covers principles, equipment and methods used in ultrasonic testing. Explains straight and angle beam examination methods.

$2,050.00

40 Hours

More info ›

Ultrasonic Testing (UT) Level II

Expanding on the Level I course, this course includes treatment of evaluating base-material products forms and weldments and detecting discontinuity.

$2,000.00

40 Hours

More info ›

Ultrasonic Thickness Testing (UTT)

Discusses principles relating to acoustics and covers the equipment, materials and techniques in ultrasonic thickness testing.

$1,250.00

24 Hours

More info ›

Visual Testing (VT) Level I

Introduces students to fundamental terminology, equipment and procedures used in visual testing.

$450.00

8 Hours

More info ›

Visual Testing (VT) Level II

Covers more in-depth remote visual testing principles, theory and evaluation techniques.

$800.00

16 Hours

More info ›